This gas detector with external CO sensor, which was subjected to a full test at TÜV Süd according to DIN EN 50291 is an indispensable safety device in probably every household! In the event of an alarm, the connected device is switched off and an additional acoustic and optical message is output. The system strikes immediately at a carbon monoxide concentration of 300 ppm. Lower concentrations trigger the alarm only after a certain waiting time specified by the standard. On the one hand, this reliably prevents any "false alarms", and on the other hand, you also receive an alarm if lower concentrations can lead to an accumulation in the blood over a longer period of time. If the gas detector is to be outside the monitoring room, the sensor cable can be fed through a Ø 13 mm wall hole. The external sensor is connected to the cable via an RJ connector.
For all households with gas heating and heating!
And for any gas consumer. Simple installation, no battery consumption, highly accurate TÜV-tested measuring cell and safety shutdown in case of error and alarm with a simple plug. Here quite deliberately without display, focused on the essentials. Carbon monoxide is poisonous, insidious and far too often deadly. You don't smell it, you don't taste it, you don't see it and you probably don't believe that your, perhaps new, heating system or gas boiler can also produce CO. If CO molecules accumulate in your blood, you will eventually fall asleep and suffocate without realizing it. The GX-C3pro warns you long before it becomes life-threatening and switches off the source of danger!
Performance features
- Simple, quick installation
- Double safety through acoustic and optical warning function and automatic shutdown of the connected appliance in case of gas leakage
- Detection of carbon monoxide (CO) according to DIN EN 50291 TÜV-tested
- External sensor enables optimum mounting height, regardless of the position of the socket outlet
- Regular automatic self-test function
- Cable breakage and reversal fuse, intelligent self-test, long-life electrochemical sensor, test button and much more.
Technical data
| Operating voltage: | 230 V~ AC / 50-60 Hz |
| Power consumption: | approx. 2 VA |
| Trigger concentration sensor: | 30 ... 300 ppm CO according to EN50291 |
| Switching capacity: | 1150 VA (700 W) / 5 A (3 A) |
| Functional area: | -10 °C...+50 °C Temp. compensated |
| Humidity: | 5%...90% rH non-condensing |
| Protection class: | IP20 for indoor use |
| Sound pressure Piezo: | >85 dB(A) @ 1m |
| Sensor service life up to max: | 6 years (max. 40°C, min. 40% rH) 10 years (max. 28°C, min. 30% rH) |
| Sensor line: | 2.5 m, Ø = 3.6 mm, white |
| Dimensions socket unit (HxWxD): | 118 x 60 x 44 mm |
| Dimensions sensor (HxWxD): | 88 x 58 x 38 mm |
WEEE NO.: EN91394868
Easy assembly
The device does exactly what the manufacturer promises
Good quality