This CO detector with internal sensor ensures optimal detection of toxic CO gases and the minimum standard as an indispensable safety device in almost every household with a place of combustion! The CO detector GX-C1pro with internal sensor simply plug into a socket at medium room height or average nose height of the main residence, thus completely without installation effort. The GX-C1pro works strictly according to DIN EN 50291, has a maintenance-free electro-chemical sensor and additionally a test button as well as 3 LEDs for operation, fault and alarm. Measuring cell, evaluation and software have been tested by TÜV Süd. This system already strikes at CO gas concentrations that are far below a level that is dangerous for you. You are warned twice, with a visual and a loud acoustic signal. Due to the high sensitivity of the electro-chemical sensor, as well as the delay times provided for in the DIN EN 50291 standard on the one hand, and the dispersion characteristics of the carbon monoxide in the room on the other, the positioning of the warning device is no longer as crucial as it used to be with the catalytically heated sensors. Just take the middle sockets, whether they sit at 1m, 1.50m or 1.80m is not so critical.
Performance features
- TÜV full inspection of the measuring cell according to DIN EN 50291
- Sensor, measuring cell, evaluation TÜV-tested
- Simple installation in seconds
- Audible and visual warning
- Integrated test button for LEDs and piezo
- Automatic sensor self-test every 24 hours, thus no check with gas necessary
- few cross-sensitivities, therefore no false alarms
- Detection of carbon monoxide (CO) according to DIN EN 50291
Technical data
| Operating voltage: | 230 (+/-10%) V AC / 50-60 Hz |
| Power consumption: | approx. 1.7 W |
| Protection class: | IP 20 |
| Sound pressure buzzer: | 85 dB(A) (distance 1m) |
| Sensor type: | electro-chemical |
| Trigger concentration CO: | approx. 30 / 50 / 100 / 300 ppm according to DIN 50291 |
| Alarm delay: | around 120 / 60 / 10 / 0 minutes according to DIN 50291 |
| Functional area sensor: | +0 °C / +40 °C |
| Storage temperature: | -20 °C / +70 °C |
| Humidity (ambient): | 5-90 % RH (non-condensing) |
| Sensor lifetime: | 6 years (max. 40°C, min. 40% rH) 10 years (max. 28°C, min. 30% rH) |
| Insert height / socket: | approx. 100 - 180 cm above ground |
| Dimensions (HxWxD): | 121 x 57 x 46 mm |
WEEE NO.: EN91394868
1 Review for CO GAS ALARM GX-C1pro