Warning systems water
Warning systems water
... more relaxed for sure
made in Germany
Who is not familiar with the scenarios of a burst water pipe, a leaking dishwasher or a burst washing machine hose? Even the unnoticed entry of rainwater through an open window can have far-reaching consequences.
SCHABUS water detector - more relaxed with safety
Whether socket or fixed installation - at SCHABUS you will always find the right water detector for every area of application
Water damage can cause unimaginable costs for private households and businesses. Not only can water alone cause immense damage, e.g. through mould growth on and in the walls, but it can also damage electronic devices and IT components through short circuits, which also significantly increases the risk of fire. Although our water detectors cannot prevent the cause of water ingress or leakage, they can warn you in good time so that you can intervene quickly. For this reason, our various water alarm systems are ideally suited for monitoring private households, storage rooms, cellars, IT rooms, boiler rooms, etc.
Overview products water
Socket outlets Water detector
Water detector SHT 240
Item no.: 300240
Aquastop SHT 216
Item no.: 300260
Water detector SHT 217
Item no.: 300217
The SHT 217 socket water detector functions as a pump control. If the sensor detects soil moisture, the socket switches on the connected pump and an alarm sounds. After the sensor has dried, the pump continues to run for an adjustable follow-up time of 0 to 100 seconds, is then switched off and the alarm stops again.
Possible applications
- Water ingress
- Pump control
- Cistern monitoring
- Pump sump (dry)
Water detector SHT 227 Pump control
Item no.: 300227
The water detector for pump control!
The SHT 227 socket water detector functions as a pump control. If a certain water level is detected with the mini float switch, the socket switches on the connected pump and an alarm sounds. After the water level drops below the specified level, the pump continues to run for an adjustable follow-up time of 0 to 100 seconds, is then switched off and the alarm stops again.
Possible applications
- Water ingress
- Pump sump
- Cistern monitoring
- Also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.)
Aquastop SHT 226
Item no.: 300228
The Aquastop SHT 226 is a protection system with device shutdown. The electronic alarm and shutdown device detects the smallest amounts of liquid and switches off the connected device.
Possible applications
- Detection of water level changes (at least 4 cm)
- also for other liquids (e.g. fuel oil, diesel, vegetable oil, lubricating oil, etc.)
Water detector SHT 241
Item no.: 300241
The water detector for simple and quick installation!
The SHT 241 socket water detector functions as a purely acoustic detector. If a certain water level is detected with the mini float switch, a loud acoustic alarm sounds and the LED flashes red. After the water drops below the specified level, the device automatically goes silent and the LED turns green again.
Possible applications / special features:
- Same unit as SHT 240, but with float switch
- Particularly suitable for dirty water or other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oil, etc.)
Water detector SHT 218
Item no.: 300218
The SHT 218 socket water detector functions as a pump control. If soil moisture is detected with the sensor, the socket switches on the connected pump and the LED visually indicates the water ingress. After the sensor has dried, the pump continues to run for an adjustable follow-up time of 0 to 100 seconds and is then switched off.
Water detector SHT 228
Item no.: 300219
The water detector for pump control!
The SHT 228 socket water detector functions as a pump control. If a certain water level is detected with the mini float switch, the socket switches on the connected pump and in contrast to the SHT 227, the SHT 228 does not sound an alarm. After the water level drops below the specified level, the pump continues to run for an adjustable run-on time of 0 to 100 seconds and is then switched off.
Possible applications
- Water ingress
- Pump sump
- Cistern monitoring
- Also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.)
SHT 450 water detector with sensor cable
Item no.: 300450
No matter where ...
whether kitchen base cabinets, laundry rooms, bathroom furniture or the aquarium in the living room:
the SHT 450 detects water leaks everywhere with its sensor line and alerts you before worse damage occurs.
The 2 meter long sensor cable (extendable on request), reacts sensitively to single drops of water along its entire length. The mechanically strong cable, resistant to corrosion and abrasion, consists of two sensor wires embedded in a fluoropolymer carrier rod. Due to the robust cable construction with conductive polymer technology and fluoropolymer construction detection, no metal is exposed. For cleaning, you can wipe it with a clean damp cloth.
For connection to the Schabus water detectors is suitable only a LiYY control line with 2x 0.14mm², which can be ordered separately.
Â
Possible applications
- Water ingress
- 100% made in Germany
- for laying under kitchen and bathroom furniture
- under aquariums
- under other devices, where water can leak over a wide area
- under pipes, tubs, tanks ...
- for indoor projects such as data centers / control rooms / HVAC / IOT
- Cistern monitoring
- Level monitoring
Smart Life - Wireless devices
WWD 200 Smart Home Adapter
Item no.: 200200
WWD 100 Wireless Water Detector
Item no.: 200100
WWD 150 Wireless Water Detector float switch
Item no.: 200150Water detector fixed installation
Water detector SHT 5000 12-24V
Item no.: 300790
SHT 5000 - the all-rounder among the water detectors - now optimized for the WWD 200 smart home adapterwhich sends you push notifications to your smartphone via the Smart Live app.
Areas of application
- Water ingress / water pipe burst
- Pump control
- Cistern monitoring
- Level monitoring
- Overflow message (e.g. drainage shaft)
- Monitoring flat roofs
- Combined with mini float switch also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.)
- Automatic bilge pumps (SHT5000-24 V for boats)
- for water sports, hobby brewers, aquariums, model making, swimming pools, bathrooms and kitchens, workshops, etc.
- IP 65 on request
Water detector SHT 5002
Item no.: 300749
The SHT 5002 water detector for top-hat rail mounting in the fuse box or small distribution board is designed as a level controller and has 2 different detection lines. Detection line 1 is the actual level controller, which receives the functions "Fill" or "Drain" by means of a wire jumper and switches its potential-free 5 A changeover relay depending on a lower and an upper level, each of which is defined by a mini float switch. Detection line 2 works like a simple water detector and is called "overflow detector" here, i.e. as soon as water is detected by a sensor or mini-float switch, the second relay of the SHT 5002 switches over.
Water detector SHT 5001
Item no.: 400748
The SHT 5001 water detector for top-hat rail mounting in the fuse box or small distribution board has 2 independent detection lines, which are designed identically with the option of connecting sensors or mini float switches to their own inputs in each case, activating the alarm memory via wire jumper or switching a potential-free changeover relay when "water" is detected. Test, reset, internal alarm beeper, or the connection of external alarm indicators with 12 volts to 30 mA, on the other hand, are carried out together for both detection lines. The cable lengths can be extended for sensors up to 100 meters, for mini-float switches up to 300 meters per signal line, provided that only thin and unshielded 2x0.14mm² LiYY cables are used, which are not laid parallel to lines of the mains AC voltage.
Water detector SHT 5000 230 VAC/50 Hz
Item no.: 300744
SHT 5000 - the all-rounder among the water detectors - now optimized for the WWD 200 smart home adapterwhich sends you push notifications to your smartphone via the Smart Live app.
Areas of application
- Water ingress / water pipe burst
- Pump control
- Cistern monitoring
- Level monitoring
- Overflow message (e.g. drainage shaft)
- Monitoring flat roofs
- Combined with mini float switch also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.)
- Automatic bilge pumps (SHT5000-24 V for boats)
- for water sports, hobby brewers, aquariums, model making, swimming pools, bathrooms and kitchens, workshops, etc.
- IP 65 on request
Water sensors
Water sensor SHT 5006
Item no.: 300745
Accessories for water detector
The standard SHT 5006 water sensor with 2 nickel-plated brass contacts and 6 meters of cable is overmolded with a soft, water-repellent plastic and has a gap between the contacts to prevent any biofilms that may form from triggering false alarms. The SHT 5006 sensor for connection to all Schabus water detectors is only suitable for regularly dry environments, ideal for detecting creeping moisture on floors and surfaces, but rather unsuitable for detecting water levels in shafts, tanks and other containers with regularly damp environments.
Water sensor SHT 5008 for floor mounting
Item no.: 300719
The water sensor SHT 5008 with three contacts is suitable for floor mounting on hard floors such as screed, concrete, but also plastic (GRP) or tarred floors. With its 3-wire cable, the redundancy function or the differentiation between standing and rising water can be realized with the water detector SHT 5001, but by combining two cables, the SHT 5008 can also be easily operated on any other Schabus water detector as a floor sensor in a more stable design.
Water sensor SHT 5800 for edge and floor mounting
Item no.: 300758
Accessories for water detector
The SHT 5800 water sensor with two contacts, completely handcrafted and suitable as an accessory for all Schabus water detectors, has stainless steel contacts and a hole reinforced with aluminum for mounting and is ideal for detecting damp floors or creeping soil moisture in regularly dry environments.
Water sensor SHT 5007 UV-stabilised
Item no.: 300754
Accessories for water detector
The water sensor SHT 5007 with 2 nickel-plated brass contacts and 6 meter cable is identical in construction to the SHT 5006 water sensor, except that here a particularly UV-stable plastic is used for overmolding, which prevents the sensor from becoming porous so quickly in outdoor areas and regular exposure to sunlight. The SHT 5007 sensor for connection to all Schabus water detectors is only suitable for regularly dry environments, ideal for detecting creeping moisture on floors and surfaces, but rather unsuitable for detecting water levels in shafts, tanks and other containers with regularly damp environments.
Aqua Scanner SHT 5020
Item no.: 300746
The Aqua Scanner SHT 5020 is a 2 meter long sensor (extendable on request), sensitive to single drops of water along its entire length. The mechanically strong cable, resistant to corrosion and abrasion, consists of two sensor wires embedded in a fluoropolymer carrier rod. Due to the robust cable construction with conductive polymer technology and fluoropolymer construction detection, no metal is exposed. For cleaning, you can wipe it with a clean damp cloth.
For connection to the Schabus water detectors is suitable only a LiYY control line with 2x 0.14mm², which can be ordered separately.
Â
Possible applications
- Accessories for SCHABUS water detectors SHT 5000, 5001 and 5002
- 100% made in Germany
- for laying under kitchen and bathroom furniture
- under aquariums
- under other devices, where water can leak over a wide area
- under pipes, tubs, tanks ...
- for indoor projects such as data centers / control rooms / HVAC / IOT
Water sensor SHT 5600 with 3 contacts
Item no.: 300753
Accessories for water detectors
The SHT 5600 water sensor is identical in construction to the SHT 5006 standard water sensor, except that with the SHT 5600 an additional third contact has been inserted in the gap between the two ground contacts. This makes it possible, in conjunction with the SHT 5001 water detector, to distinguish between the messages "soil moisture" and "water rising further" and to take different measures, since with the SHT 5001 a separate relay is switched for each of the two states. 
Water sensor SHT 5009 for floor mounting
Item no.: 300720
Accessories for water detector
The water sensor SHT 5009 with three plate electrodes is suitable for floor mounting on soft floors such as parquet, laminate, but also carpets or linoleum floors. With its 2-wire cable it is directly ready for connection to the Schabus water detectors SHT 5000 and SHT 5001, as well as to the level controller SHT 5002 as overflow detector. The middle drill hole is reinforced with aluminum, so depending on the type of mounting desired, a thread can also be cut.
Water sensor SHT 5090
Item no.: 300721Float switch
Float switch
Item no.: 200983
Mini float switch plastic normally open contact
Item no.: 200940
Standard mini float switch made of plastic for our water detectors SHT 5000, SHT 5001 and SHT 5002 with reed contact (25 V AC / 60 V DC / max. 0.5 A / max. 10 W) for all types of water and liquid media from 0.7 g / cm³, encapsulated with 2.5 metre long LiYY cable.
Possible applications
- Accessories for SCHABUS water detectors SHT 5000 and 5001, 5002
Mini float switch V2A normally open contact
Item no.: 200941
Stainless steel mini float switch for our water detectors SHT 5000, SHT 5001 and SHT 5002 with reed contact (25 V AC / 60 V DC / max. 0.5 A / max. 10 W) for food, water and many other liquid media from 0.7 g / cm³, to which stainless steel is resistant. Encapsulated with a 2.5 metre long LiYY cable.
Folding float switch plastic
Item no.: 200949
Suspended float switch plastic
Item no.: 200950
Folding float switch 230 volt
Item no.: 300949
Mini float switch plastic changeover contact
Item no.: 200938
Mini float switch V2A changeover contact
Item no.: 200939
Mini float switch V4A normally open contact
Item no.: 300941
Stainless steel mini float switch for our water detectors SHT 5000, SHT 5001 and SHT 5002 with reed contact (25 V AC / 60 V DC / max. 0.5 A / max. 10 W) for food, water and many other liquid media from 0.7 g / cm³, to which stainless steel is resistant. Encapsulated with a 2.5 metre long LiYY cable.
Mini float switch V4A changeover contact
Item no.: 300939
Stainless steel mini float switch for our water detectors SHT 5000, SHT 5001 and SHT 5002 with reed contact (25 V AC / 60 V DC / max. 0.5 A / max. 10 W) for food, water and many other liquid media from 0.7 g / cm³, to which stainless steel is resistant. Encapsulated with a 2.5 metre long LiYY cable.
Active water sensors & float switches
Water detector accessories
Relay plug-in card accessories SHT 5000
Item no.: 300747
The optionally available relay plug-in card for the SHT 5000 assigns each of the 4 detection lines, in addition to the main relay, its own small changeover relay, which is polled by the WWD 200 smart home adapter. In contrast to the main relay, the 4 small relays of the relay plug-in card are not energized in monitoring mode and only pick up when the assigned detection line is activated by the water. The relay plug-in card has no influence on the various setting options of the SHT 5000 and can be retrofitted at any time.
Mounting bracket f. mini float switch
Item no.: 300787
Dirt trap accessories for mini float switches
Item no.: 300320
Level indicator SET
Item no.: 300782
Performance features
- The digital tank display of the current content quantity is optionally in litres, in centimetres of filling level or as a percentage.
- For various liquids: Heating oil, diesel, biodiesel, vegetable oil, palm oil, rapeseed oil, water, lubricating oils, AdBlue, etc.
- Up to 2 m water column / oil tanks up to 2.5 m height
