The high-end float switch made of V4A stainless steel is more resistant to corrosion in salt water and chlorine-containing media such as pool and swimming pool water. It is popularly used in the chemical industry due to its resistant properties.
In contrast to the float body, which is pressed from thin V4A sheet metal in each type, the shaft is elaborately milled and turned from the full V4A material, making the V4A float switch a unique high-tech part "made in bavaria".
The stainless steel float switch is reliable, maintenance- and wear-free and easy to install. The lower the voltages and currents, the more switching cycles are possible. According to Meder, 1 trillion switching cycles can be achieved if the switching power is kept below 5 volts and 1 mA, which applies to all water detectors from Elektrotechnik Schabus.
Only Meder reed contacts are potted waterproof in the shaft. The contact switches on at a certain level and activates the input of the water detector. By turning the float body around, the reverse contact function is also obtained. With the changeover contact, there is no need to turn the float.
As with all sensors and float switches from SCHABUS, it is also possible with this float switch to get the cable in desired length or other types. Talk to our technical support.
Useful accessories are the mounting bracket or the dirt trap incl. mounting bracket, which ensure that the mini float switch is mounted as vertically as possible with a deviation of max. 30°, so that the float can move freely on the shaft without jamming.
Performance features
- V4A stainless steel material
- V4A is good for food, drinking and fresh water
- Reed contact soldered and cast in with cable
- Cable length 2.5 m (special lengths on request)
- Normally closed (NC) / normally open (NO) - Turning the float body corresponds to reversed contact function, not applicable for changeover contact
- Suitable for all liquids with a density of at least 0.7 g/cm³.
- Shaft turned from the solid and milled
- Line quality by agreement, otherwise LiYY/PVC as standard
Technical data
Electr. connection: | Cable 2.5 m (special length on request) |
Mech. Connection: | V4A stainless steel thread |
Sliding tube: | ø8 mm stainless steel V4A |
Swimmer: | ø28 mm stainless steel V4A |
Switching function: | NC contact (NC) / NO contact (NO) |
Contact Rating: | Switching capacity max. 10 W |
Switching voltage: | 25 V AC / 60 V DC / 0.5 A |
Switching current: | 0,5 A |
Temperature range: | -20°. . . max. 100°C |
Protection class: | IP 68 |
Density v. Medium: | min 0.7g/cm³ |
Print: | Unpressurised |
Installation position: | vertical, max. ±30° inclination |
Dimensions: | H=55mm x Ø=27,5mm |
WEEE NO.: EN91394868
Reviews
There are no reviews yet.